It is currently Thu Nov 15, 2018 1:47 am

All times are UTC + 1 hour [ DST ]





Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 18 posts ]  Go to page 1, 2  Next
Scott oiler
Author Message
 Post subject: Scott oiler
PostPosted: Fri Jan 16, 2009 12:09 am 

Posts: 4706
I have secured the Scott oiler delivery pipe with gray cable ties to the swing arm and i think they look poor. I'm considering either drilling and tapping some holes in the arm to secure it or just using self tappers or even pop rivets. Has anyone done this? or what are your thoughts?


Top
  
 
Scott oiler
Author Message
 Post subject: Re: Scott oiler
PostPosted: Fri Jan 16, 2009 1:14 am 

Posts: 4706
You can buy very strong adhesive sticky pads that have a small plastic ratchet loop in them like a cable tie thst you could stick on the underside of the swing arm and feed the oiler thru'. I don't know the name of them but the sparkies at work used to use them and they wouldn't come off............just a thought :mrgreen:


Top
  
 
Scott oiler
Author Message
 Post subject: Re: Scott oiler
PostPosted: Fri Jan 16, 2009 8:07 am 

Posts: 4706
i put mine to the front sprocket you can't see any pipes


Last edited by task on Fri Jan 16, 2009 7:09 pm, edited 1 time in total.

Top
  
 
Scott oiler
Author Message
 Post subject: Re: Scott oiler
PostPosted: Fri Jan 16, 2009 2:42 pm 

Posts: 4706
task wrote:
i put mine to the front speocket you can't see any pipes


Aaah.. good trick!


Top
  
 
Scott oiler
Author Message
 Post subject: Re: Scott oiler
PostPosted: Fri Jan 16, 2009 8:24 pm 

Posts: 4706
I've seen them glued on, screwed on and even hold on with cable ties so there's no right way.

I would steer away from the screw version personally.

Old wobbler


Top
  
 
Scott oiler
Author Message
 Post subject: Re: Scott oiler
PostPosted: Fri Jan 16, 2009 9:35 pm 

Posts: 4706
task wrote:
i put mine to the front sprocket you can't see any pipes


Hmm, I honestly dont know why but something about that seems wrong.

I suspect if that worked Scottoiler would reccomend it themselfs but they dont actually say anything about it.

You will have to keep us appraised Heath, let us know how it goes m8.


Top
  
 
Scott oiler
Author Message
 Post subject: Re: Scott oiler
PostPosted: Sat Jan 17, 2009 2:57 am 

Posts: 4706
I thought scottoiler recommended not fitting it to the front sprocket?


Top
  
 
Scott oiler
Author Message
 Post subject: Re: Scott oiler
PostPosted: Sat Jan 17, 2009 12:06 pm 

Posts: 4706
You usually get these
).html

in the kits to fit all the pipes to the frame/swinging arm.

Follow this link and look for spares and accesories at the bottom of the page. Once clikced it will load 9 pages of spare parts to make the system that you want.

Old wobbler


Top
  
 
Scott oiler
Author Message
 Post subject: Re: Scott oiler
PostPosted: Sat Jan 17, 2009 12:48 pm 

Posts: 4706
I have used the two dispenser mounting sleeves, it's these that are cable tied to the swing arm. I know in the instructions it says you can glue them down but in my experience glue never works or if it does it's only temporary. I think I will screw the dispenser sleeves down and get rid of the cable ties.


Top
  
 
Scott oiler
Author Message
 Post subject: Re: Scott oiler
PostPosted: Sat Jan 17, 2009 1:26 pm 

Posts: 4706
---------
Why can't you use double sided tape, such as carpet tape, to stick them to the swinging arm?

Old wobbler


Top
  
 
Display posts from previous:  Sort by  
Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 18 posts ]  Go to page 1, 2  Next

All times are UTC + 1 hour [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron

Free Forum · php-BB© · Internationalization Project · Report abuse · Terms Of Use/Privacy Policy
© Forums-Free.com 2009