It is currently Tue Aug 22, 2017 9:25 am

All times are UTC + 1 hour [ DST ]





Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 10 posts ] 
push rod oil seal
Author Message
 Post subject: push rod oil seal
PostPosted: Sat Apr 25, 2009 6:57 pm 

Posts: 4706
hi all, so i removed the push rod to clean it all up for a smoother clutch and it pissed out oil as soon as i removed it! so i ordered the new one from robinsons......but.......i havent a scooby how to change it as its the first time one has ever gone on me.

now i have done a search on here but i can find the info i need in order to replace it! can anyone point me in the correct direction. im assuming i prize it out then just pop the new one in????

any help mucho appreciated!


Top
  
 
push rod oil seal
Author Message
 Post subject: Re: push rod oil seal
PostPosted: Sat Apr 25, 2009 7:42 pm 
Offline
User avatar

Joined: Tue Aug 19, 2008 7:04 pm
Posts: 377
Location: Derby
suzukib wrote:
hi all, so i removed the push rod to clean it all up for a smoother clutch and it pissed out oil as soon as i removed it!



That's why there's a seal there, there's oil floating about in the gearshaft ;) If it wasn't leaking past the pushrod before you pulled it out the seal is ok.

You should be able to pull the seal out by screwing a couple of self-tappers into it 180 deg apart and then pulling with pliers.

To fit the new one find a socket the same size or just smaller than it's od. Grease/WD the rim of the new seal and push it in, tap it home squarely with the socket. It's a dead fit obviously but you may get it to shrink down slightly by popping it in the freezer the night before fitting it.


Top
 Profile E-mail  
 
push rod oil seal
Author Message
 Post subject: Re: push rod oil seal
PostPosted: Sat Apr 25, 2009 8:02 pm 

Posts: 4706
legend! sorry for being a twit :oops: my bandit never used to leak when i pulled out the push rod, so that was new to me! in that case i will keep the new one just in case.... the pushrod doesnt leak when the rod is in place so am i right in thinking its ok? :oops:


Top
  
 
push rod oil seal
Author Message
 Post subject: Re: push rod oil seal
PostPosted: Sat Apr 25, 2009 8:19 pm 
Offline
User avatar

Joined: Tue Aug 19, 2008 7:04 pm
Posts: 377
Location: Derby
When you took the push-rod out of your Bandit, was it on the centre-stand? ;)

It's fine :gj:


Top
 Profile E-mail  
 
push rod oil seal
Author Message
 Post subject: Re: push rod oil seal
PostPosted: Sat Apr 25, 2009 10:36 pm 

Posts: 4706
nah coz centre stand was removed to save weight! lol.....well at least the ruff is ok! next thing on the list is an overdue coolant change!!

thanks for your help mate


Top
  
 
push rod oil seal
Author Message
 Post subject: Re: push rod oil seal
PostPosted: Sun Apr 26, 2009 12:48 pm 
Offline

Joined: Tue Apr 21, 2009 7:22 pm
Posts: 10
have you got a part no for the seal ? by any chance have you got a no. for the push rod too :?:
cheer .John
edit; got a part no. for seal :) can't find a no. for the rod though :cry:


Top
 Profile E-mail  
 
push rod oil seal
Author Message
 Post subject: Re: push rod oil seal
PostPosted: Sun Apr 26, 2009 2:52 pm 
Offline
User avatar

Joined: Tue Aug 19, 2008 7:04 pm
Posts: 377
Location: Derby
There's two, and one is different depending on year/clutch type ....

'R' model (diaphragm clutch)

Image

#24 - 23110-27A00 CLUTCH PUSH ROD £13.51

#25 - 23111-24A01 CLUTCH PUSH ROD £8.87



'S', 'T', 'V' model (multi spring type)

Image

#21 - 23110-27A00 CLUTCH PUSH ROD £13.51

#22 - 23111-30001 CLUTCH PUSH ROD £7.46


I don't know what the difference is between the two outer rods


Top
 Profile E-mail  
 
push rod oil seal
Author Message
 Post subject: Re: push rod oil seal
PostPosted: Sun Apr 26, 2009 3:08 pm 
Offline

Joined: Tue Apr 21, 2009 7:22 pm
Posts: 10
where did you get your price from mate ? i tried the number on robinsons and it said no part recognised ! :cry: as for the difference i think i'll try the early one as i'm riding an N reg bike that is slowly trying to bankrupt me piece by piece and the early one is cheaper ;) [as long as its the right one] !
cheers .John


Top
 Profile E-mail  
 
push rod oil seal
Author Message
 Post subject: Re: push rod oil seal
PostPosted: Sun Apr 26, 2009 3:14 pm 
Offline
User avatar

Joined: Tue Aug 19, 2008 7:04 pm
Posts: 377
Location: Derby
I popped the numbers into Robinson's parts finder no problem :shock:

Can't find a spec for the pushrods so I csn't help with dimensions. I've got a couple of the inner ones (mushroomed ends) but haven't spotted and outer one.


Top
 Profile E-mail  
 
push rod oil seal
Author Message
 Post subject: Re: push rod oil seal
PostPosted: Sun Apr 26, 2009 3:23 pm 
Offline

Joined: Tue Apr 21, 2009 7:22 pm
Posts: 10
---------
just tried robinsons again and guess what........... the number worked :oops: must realize copy and paste works better than trying to remember things :oops: :oops: thanks f.f :D


Top
 Profile E-mail  
 
Display posts from previous:  Sort by  
Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 10 posts ] 

All times are UTC + 1 hour [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron

Free Forums · php-BB© · Internationalization Project · Report abuse · Terms Of Use/Privacy Policy
© Forums-Free.com 2009