Body Modifications & Color codes

DarwinLS · **Posted:** Thu Apr 23, 2009 6:21 am

What are the color codes for our 900 series stock?

Also what bodies can be used for the tails? I heard that a 98 year style gixxer rear end is bodtable to it, but not 100% sure.

thanks!

-dLs- :twisted:

~Phoenix

Drac · **Posted:** Thu Apr 23, 2009 9:28 am

DarwinLS wrote:

What are the color codes for our 900 series stock?

Also what bodies can be used for the tails? I heard that a 98 year style gixxer rear end is bodtable to it, but not 100% sure.

thanks!

-dLs- :twisted:

~Phoenix

try here

Bradlad · **Posted:** Thu Apr 23, 2009 11:27 am

Any change of rear panels means altering the subframe m8, its wide and square so nothing else will bolt straight on.

A commone rear end mod is to change it for the ninja 636 one as it only means removing the cross piece at the back and bending the frame in a little each side.

rowland h · **Posted:** Thu Apr 23, 2009 5:14 pm

check this out

DarwinLS · **Posted:** Fri Apr 24, 2009 12:26 am

Bradlad wrote:

Any change of rear panels means altering the subframe m8, its wide and square so nothing else will bolt straight on.

A commone rear end mod is to change it for the ninja 636 one as it only means removing the cross piece at the back and bending the frame in a little each side.

I know its rather square, but if you get rid of the saddlebag pins its not that bad, i just dont wanna tear apart my daily driver for this project.

Any pictures of the 636 rear?

-dLs- :twisted:

~Phoenix

rowland h · **Posted:** Fri Apr 24, 2009 5:01 pm

DarwinLS · **Posted:** Fri Apr 24, 2009 8:25 pm

Thanks!

So whats the deal with the rf6 rear seats vs the rf9's seats. Are they interchangeable?!

-dLs- :twisted:

~Phoenix